Видео

I'd be careful where you display this thing. As they have a habit of blowing up.

Грунтовкой не красили перед покраской в черный матовый???👀

I love how your models turn out id love to do work like yours!!

Can we get a video of your model collection?

Alone the thumbnail.... the camoupfalge pattern is historically INACCURATE! The pattern shown was in use only for a few hours during Bismarck's stay in norwegian waters. Before leaving Norway the colour scheme of Bismarck has been changed once more. The diagonal stripes on the hull have been overpainted with grey. Only near the waterline some white areas remained. The darker bow and stern areas have been made bighter so the whole hull wsa in one and the same grey! The stern wave was removed completely. the bow wave was weakened drastically. And I wonder WHY ON EARTH so many people building a Bismarck model choose this pattern that was applied only for a few hours? And only few apply the colour scheme that was actually used on her first and final voyage? This bothers me a great deal every single time, I see that. When I built my 1/200 scale Bismarck (model kit by Amati), the instructions displayed all 3 colour schemes the Bismarck had. And It irritates me that most model kit manufacturers do not provide proper information about historically accurate colour schemes. Single hull??? I would feel betrayed. Why do no kit manufactureres, except Amati, make kits where you have to construct the complete hull out of seperate parts? Keel plate (consisting of 5 parts), than the ribs, than assemble the first planking, fill in some gaps, grind it smooth, assemble second planking, fill in some gaps, grind it smooth again... Oh, and: the parts for the hull are of course made of wood! No bloody plastic.

Just a question please. I bought a Revell SR71 kit. I am new to this and don't have the airbrush equipment. Would it be good enough to buy a can of matt black spray paint? Or would that provide an inferior finish?

What kind of putty do you use, please?

hello, your build of this aircraft as always beautiful! do you have a 1/48 ww2 bomber in the works?? would love to see you take one on, just one question, when you shoot glosscoat and dull, what is your clear to thinner ratio?

Came for the build, stayed for the music

Tip: if your yellow paint is really watery after shaking.. plane Taniya’s pink down let it dry then lay your yellow

This is the best production model video I have ever seen. First and foremost, I like the fact that it’s narrated. And also, I really enjoy the photos and background story you give of the model before you begin. Also, like the fact that you provide facts about your subject matter during the build, I’m definitely a subscriber now !

Great looking model, thanks for your service.

Great model and looks really good when done. I like the weathering you did. It would have been nice if they included the addition to the engine frame for the 2nd season. They did that so they could should the blast come out of the east engines.

As a kid, I used to be able to make paper origami of the Eagle from Space 1999 one of my favorite TV series. Now at 55 I have forgotten the steps😢

Hello I've just bought this kit. Your video is great and will help me a lot throughout this build. Thank you.

Man, you got me. As soon as ibheard that AI voice i was like "oh no, what happened to the narration i love that!"

Love how details in such a flat color as black end up highlighted. Do you put varnish before applying the oil wash? Or straight on top of the paint? What type of paint is it, acrylic, enamel? Doesnt the wash mess up the paintwork when you go over with the cloth? Thanks!! Love your videos!

Thanks for the video! Im trying to follow same steps you did to learn, more specifically the marbling effect, which is quite nice. Question: I see you use cotton to mask the landing gear bays. Doesnt that make the cotton fibers to be stuck to the model when you paint with the black primer? Up to this point Ive been using blue tac, but I always have problems with this kind of big empty spaces that need covering

Lot's of work man, I've seen those jets, (different squadron than mine) back in the '80's,,,,,,,,,,, love your "DETAIL"!

Hello my friend. Your gap that you ended up with behind the cockpit was because you didn't install the back wall of the cockpit properly and left it too high forcing the fuselage halves open.

Great video. Your attention to detail, skill and experience makes the end result a work of art. An iconic spacecraft indeed!

I really like your choice of markings for a real hero.

I need 3 of these. I'll be painting them yo as starscream, skywarp and Thundercracker.

where did you get those masking things for the swastika? and how did you align them? my starbord deck did not have the little ring on it to guide you.

yummy looking ship Potoo approved

trumpeter photo etch is too thin easily damaged

Well done video with some great tips!

If you add thinner to the paint, what is its ratio?

That is freaking beautiful...Wow.

I believe that’s it. One bright point is that high school student that lived up there asked questions and was leading figure in getting the Captain’s name cleared. That and navy vessels now have ETAs and vessels are called/ looked for if a vessel misses its ETA.

The Indianapolis got off an SOS before sinking but couldn’t get off an authentication because she went down too quickly. The SOS was heard and 2 tugs set out only to be recalled by the base CO (who was at a party the night before) returned the next day. Had those tugs arrived more crew could’ve been saved. The Indy CO committed suicide because of his felt guilt and hate mail from families of those that died- due to Inquiry verdict. A really sad book but well worth a read. Good model build.

Good work. It's hard to find a model build video without a ton of aftermarket parts worth double the original set price.

Tremendous. Thank you. Bravo.

Good. Pleas next MIG-31.

If you put the cockpit decals over the molded details and then press down lightly with a small piece of a paper towel, they’re go right on the molded detail without breaking.

Hey, looking good! Can you tell us a little more about the talc on the exhaust?

thank you for the video!. Very well explained

FYI the kit was first issued in 1977 and I built in 1979. For that period it was great.

Invisible painted wheels. I guess that is were obsession and pragmatism separate 😂

I find it sad that the kit manufacturer didn't appreciate the difference in the fin between the single and twin seat F-105. Because of the increase in yaw about the centre of gravity they needed to increase the area of the Fin. They did this by extending the chord above the kinked area thus smoothing it out quite a bit. If you examine photos it becomes very obvious when you know what to look for.

Thank you a video with authentic sounds not any of that loud techno music over the footage 💯

I still pine for a GI Joe/Star wars style eagle playset that can open up and interact with action figures, etc...

hey, great build. I am currently building the same f111 andfind your video a great source of infos, and i need to know if you can send the templte for the color scheme, since i can't scale it right

I learned more in last half hour watching your A10build than i have learned in last 2 years of model making thank you so much for the time you take to do these helpful video,s the only reason i clicked on was that i am building that exact A10 ATM and was struggling to find the correct colours to use , you my friend have cured that problem for me .

omg it's got the pc incorrect squiggly lines .....

This gentleman has the finest, greatest method to retain an audience I've ever seen: The intermitent appearance of footnotes and assorted tidbits of info, among the tools or paint brands and types. Brilliant. Besides a great modeller, the best "Advertising Engineer" said industry could ever hire. Bravo, loved the build and the vid!

I hadn't had much interest in WW1 ships, but this one is quite the looker. Very nicely done! Another way you can do salt lines is dabbing on small amounts of flat clear with a tiny bit of sponge. It can create a very life like result if done carefully and with moderation. Love the movie clips you throw in too - very cool. Way better than emoticons

I miss the F-111 fly overs every ANZAC Day.

Love the presentation of your videos, with the movie clips! What's next on your build table?

Ever wonderef why bismarck did not wipe out those torpedo planes,when they approaced?